맞춤형 구리 호일 적층 버스 바

√  효율적인 전력 전송을 위한 우수한 전기 전도성.

√  유연성이 뛰어나 모양을 쉽게 바꾸고 구부릴 수 있습니다.

√  견고한 구조로 내구성과 진동 저항성이 뛰어납니다.

√  까다로운 환경에서도 안정적으로 작동할 수 있는 열 안정성

√  다양한 크기와 구성으로 제공되어 다양한 용도에 맞게 사용할 수 있습니다.

귀하의 프리미어 라미네이트 버스 바 제조업체

As a manufacturer of laminated busbars, we are committed to providing highly customized electrical connection systems to our customers worldwide. With fully automated precision production lines and an experienced R&D team, we have achieved breakthroughs in everything from material science to structural design to create conductive solutions that combine high performance with high safety.

적층버스바란 무엇인가?

Adopting multi-layer composite lamination process, the conductive layer (copper/aluminum) is alternately laminated with high-performance insulating materials such as polyimide (Kapton) and polyester (Mylar), which are integrally molded by high temperature and high pressure to achieve:
✅ Ultra-low impedance: parallel distribution of conductive layers reduces eddy current losses and lowers resistance by 40%+.
✅ Intelligent Heat Dissipation: Multi-layer interfaces form a heat transfer matrix that controls temperature rise better than industry standards.
✅ Dynamic Flexibility: Three-dimensional moldable design supports complex spatial wiring (bending life >100,000 times).

버스바를 적층하는 이유는 무엇입니까?

Busbars are laminated to enhance flexibility, reduce resistance, improve heat dissipation, enhance insulation, and allow for customization. By sandwiching conductive layers between insulating materials, laminated busbars offer efficient power transmission, minimize the risk of short circuits, and provide excellent dielectric properties.

1. electrical performance jump

• Low resistance: The multi-layer parallel structure increases the current carrying capacity per unit cross-section area by 3 times;
• Low inductance: Reverse current magnetic field canceling effect reduces inductance to 1/5 of conventional structures;
• Anti-interference: shielding effect reduces electromagnetic noise (applicable to sensitive scenarios such as inverters and data centers).

2. Thermal management revolution

•  Multi-layer interface to form a heat conduction matrix, heat dissipation efficiency increased by more than 40%;
• Uniform current distribution eliminates localized hot spots (e.g. electric vehicle battery pack temperature difference can be controlled within ±2℃).

3. Space and reliability breakthrough

• Compactness: the volume is 70% smaller than traditional busbar under the same current-carrying capacity;
• Vibration-resistant: the integrated structure is certified by IEC 61439 and is resistant to salt spray corrosion for 2000 hours.

적층과 단열의 차이점은 무엇인가요?

적층 버스 바는 다음과 같은 여러 가지 장점을 제공합니다.

1. Superconductivity

• Copper layer purity ≥ 99.99%, conductivity 58MS/m;
• High-frequency scenarios (such as photovoltaic inverters) power loss reduced by 60%.

2. Dynamic flexibility

• Three-dimensional bendable (minimum bending radius 3 times the thickness);
• Bending life >100,000 times (for robot joint wiring).

3. Environmental adaptability

• Operating temperature -40℃~+150℃;
• UL94 V-0 flame retardant certification.

4. Safety Barrier

• Interlayer breakdown strength ≥300V/μm;
• Arc failure rate reduced by 90% (compared with traditional switchgear).

5. Full Scenario Adaptation

• Voltage coverage 600V~35kV;
• New energy (PV/energy storage), rail transportation, industry 4.0 and other cross-field applications.

Get Customized Solutions Now

Whether you need high-frequency, low-inductance busbars, ultra-thin flexible conductors, or high-temperature-resistant specialty models, our engineering team will provide a technical response within 24 hours. Submit your requirements and unlock the performance limits of next-generation electrical connection systems!